Standard short stroke kit will shorten lever stroke 1 3/4"......$150.00
Super short stroke kit will shorten lever stroke 2 1/4"..........$150.00
Installation instructions included.
If you purchase a short stroke kit at the same time you purchase a rifle the short stroke kit is $140.00 ea.
WINCHESTER 1897 REPLACEMENT PARTS
Winchester Model 1897 Parts List
| 1. Barrel - 150.00 ea. | 42. Firing pin lock - 8.50 ea. |
| 2. Magazine band bushing - 15.00 ea. | 43. Trigger - 12.00 ea. |
| 3. Magazine band bushing screw (2) - 2.00 ea. | 44. Guard bow - 20.00 ea. |
| 4. Magazine band - 22.00 ea. | 45. Trigger stop screw - 2.00 ea. |
| 5. Extension - 100.00 ea. | 46. Trigger spring - 2.00 ea. |
| 6. Adjusting sleeve - 30.00 ea. | 47. Buttstock bolt -7.00 ea. |
| 7. Barrel chamber ring - 11.50 ea. | 48. Buttstock bolt washer - 1.50 ea. |
| 8. Adjusting sleeve lock screw - 2.50 ea. | 49. Receiver shank - 12.00 ea. |
| 9. Adjusting sleeve lock - 12.50 ea. | 50. Carrier pin - 3.50 ea. |
| 10. Magazine plug screw (2) 2.00 ea. | 51. Receiver - 100.00 ea. used (FFL required) |
| 11. Magazine plug - 8.50 ea. | 52. Ejector spring - 4.50 ea. |
| 12. Magazine locking pin - 5.95 ea. | 53. Ejector spring screw -2.50 ea. |
| 13. Magazine locking pin spring - 2.50 ea. | 54. Barrel chamber ring retaining screw (2) -2.00 ea. |
| 14. Magazine plug stop - 6.50 ea. | 55. Sear spring screw - 2.00 ea. |
| 15. Action slide sleeve screw stop 2.00 ea. | 56. Sear spring - 6.50 ea. |
| 16. Action slide spring - 2.50 ea. | 57. Cartridge guide rivet - 3.00 ea. |
| 17. Action slide - 75.00 ea. used | 58. Cartridge guide - 6.00 ea. |
| 18. Magazine tube - 70.00 ea. used | 59. Mainspring - 18.00 ea. |
| 19. Magazine follower - 6.00 ea. | 60. Mainspring pin - 2.00 ea |
| 20. Magazine Spring -12 or 20ga. - 5.50 ea. | 61. Cartridge guide friction spring -3.50ea. |
| 21. Action slide lock release plunger pin spring -3.50 ea. | 62. Hammer pin - 3.00 ea. |
| 22. Action slide lock release plunger pin - 4.00 ea. | 63. Action slide lock release plunger 8.00 ea. |
| 23. Cartridge guide stop screw - 2.50 ea. | 64. Sear pin - 2.50 ea. |
| 24. Trigger pin - 2.50 ea. | 65. Sear - 16.00 ea. |
| 25. Cartridge stop spring (2) -3.00 ea. | 66. Hammer stirrup pin - 2.00 ea. |
| 26. Left cartridge stop - 12.50 ea. | 67. Hammer stirrup - 4.00 ea. |
| 27. Right cartridge stop - 12.50 ea. | 68. Carrier - new-65.00 ea. used-45.00 ea. |
| 28. Cartridge stop screw, left - 3.00 ea. | 69. Carrier pin stop screw - 3.00 ea. |
| 29. Cartridge stop screw, right - 3.00 ea. | 70. Action slide lock spring - 4.00 ea. |
| 30. Action Slide Hook - 15.00 ea. | 71. Action slide lock - 14.50 ea. |
| 31. Firing pin lock screw - 2.25 ea. | 72. Action slide lock joint pin stop screw -2.50 ea. |
| 32. Extractor, left - 14.50 ea. | 73. Action slide lock joint pin - 2.50 ea. |
| 33. Extractor pin, left - 2.50 ea. | 74. Action slide lock spring screw -2.50 ea. |
| 34. Extractor plunger, right - 4.00 ea. | 75. Mainspring strain screw - 2.50 ea. |
| 35. Extractor plunger spring, right - 2.00 ea. | 76. Ejector pin - 4.00 ea. |
| 36. Extractor, right - 12.50 ea. | 77. Extension stop screw - 3.00 ea. |
| 37. Action slide hook screw - 5.25 ea. | 78. Front sight - 3.00 ea. |
| 38. Firing pin lock spring - 2.00 ea. | 79. Buttplate screw (2) 2.00 ea. |
| 39. Firing pin stop pin - 2.00 ea. | 80. Buttplate - check with us on this item |
| 40. Breach bolt (stripped)- 50.00 ea. | 81. Hammer - 35.00 ea. |
| 41. Firing pin - 20.00 ea. |
These stainless steel magazine springs will cut down on the rust build that you get with the stock steel spring.
1866 AND '73 RIFLES...........$15.00
STAINLESS STEEL AND BRONZE FOLLOWERS
Small follower will fit .38/.357 calibers
Large follower will fit .38/40 and larger calibers
1866 AND '73 RIFLES.............................$15.00 EACH
1892 EMF/HARTFORD............................$15.00 EACH
These springs will give you a smooth more durable action in your competition rifle.
Instruction sheet included.
1866 AND 1873 RIFLES.........................$45.00
This one piece firing pin was designed to replace that soft steel stock firing pin.
Instruction sheet included.
1866 and 1873..................$20.00
This little coil spring gives you just what you need for that lever safety.
1866 and 1873.........................$6.00
For Henry, 1866, and 1873 Uberti rifles............ $60.00 ea.
COIL MAINSPRING CONVERSION KIT
Replace that stock flat main spring with this smooth roller bearing coil main spring kit.
For Uberti 1866 and 1873 Rifles..............................$150.00
THUNDERSTICK BIG BOY FRONT SIGHT
This is a great front sight for your rifle. Available in .312 to .570 height with a large 5/32" gold bead, these sights are windage drift adjustable and have a standard 3/8" dovetail.
For all barrel mounted sight rifles..................................$20.00
Revolvers
Single action modifications and repairs on Colts and Colt clones.
Action work includes custom springs, trigger job, time and fit hand. $50.00 ea.
Special pricing with purchase only. All work fully guaranteed.
Please allow a 2-week turnaround.
1911 .45'S
Action work on your .45 Auto. we can tune and replace all the springs to make your
1911 Wild Bunch or Action match ready. Complete action job $75.00.
Rifles
Action jobs on 1866, 1873, 1892 and Henrys.
Action work includes tuning all springs, trigger job, polishing action and carrier, adjust lever tension $110.00
Install short stroke kit at same time as action job is $45.00
Special pricing with purchase only. All work fully guaranteed.
Please allow a 2-week turnaround.
Short stroke for 1866, 1873, and Henrys
Install short stoke kit labor only $45.00
Special pricing with purchase only.
Contact us for any gunsmith work you may want done and we'll give you a shipping address.